The rapid progression of piezoelectric technology and the upgradation of electronic devices have resulted in a global increase in Pb-based piezoelectric ceramic materials. In this study, the feasibility of incorporating Pb into a PbZr(PO4)2 double orthophosphate structure was evaluated by investigating the interaction mechanism of the perovskite with phosphate. The unique combination of X-ray absorption spectroscopy, selected area electronic diffraction, and Pawley refinement revealed that Pb was incorporated into a hexagonal structure and tetra-coordinated with oxygen in the phosphate-treated product. https://www.selleckchem.com/products/atglistatin.html The chemical durability was enhanced through the structural alterations via Zr-O-P and Pb-O-P bond linkages. The stable phase encapsulating both Pb and phosphate showed effectiveness not only in stabilizing Pb but also in inhibiting P release as a secondary pollution risk within a wide pH range (1 ? pH ? 13). Despite the excellent chemical durability of the robust PbZr(PO4)2 crystalline phase, the increased Ti doping amounts at the Zr site resulted in a slight decrease in the lattice parameters and further enhanced the Pb stabilization effect through the formation of PbZrxTi(1-x)(PO4)2 solid solutions. This study demonstrates that the newly robust crystalline structure, developed through a well-designed thermal treatment scheme, provides an effective strategy for the treatment of Pb frequently encountered in electronic wastes.While the metathesis reaction between alkynes and carbonyl compounds is an important tool in organic synthesis, the reactivity of alkynes with isoelectronic main-group R2E?O compounds is unexplored. Herein, we show that oxophosphonium ions, which are the isoelectronic phosphorus congeners to carbonyl compounds, undergo [2 + 2] cycloaddition reactions with different alkynes to generate 1,2-oxaphosphete ions, which were isolated and structurally characterized. The strained phosphorus-oxygen heterocycles open to the corresponding heterodiene structure at elevated temperature, which was used to generate six-membered phosphorus heterocycles via hetero Diels-Alder reactions. Insights into the influence of the substituents at the phosphorus center on the energy profile of the oxygen atom transfer reaction were obtained by quantum-chemical calculations.Iron electrocoagulation (EC) can be used for decentralized treatment of arsenic(As)-contaminated groundwater. Iron EC involves the electrolytic dissolution of an Fe(0) electrode to Fe(II). This process produces reactive oxidants, which oxidize As(III) and Fe(II) to As(V) and a range of Fe(III) (oxyhydr)oxide phases. Here, we investigated the impact of manganese (Mn) on As removal, since the two often co-occur groundwater. In the absence of Mn(II), we found rapid As(III) oxidation and the formation of As(V)-Fe(III) polymers. Arsenic removal was achieved upon aggregation of the As(V)-Fe(III) polymers. In the presence of Mn, the mechanism of As removal varied with pH. At pH 4.5, As(III) was oxidized rapidly by OH● and the aggregation of the resulting As(V)-Fe(III) polymers was enhanced by the presence of Mn. At pH 8.5, As(III) and Mn(II) competed for Fe(IV), which led As(III) to persist in solution. The As(V) that did form was incorporated into a mixture of As(V)-Fe(III) polymers and a ferrihydrite-like phase that incorporated 8 % Mn(III); some As(III) was also sorbed by these phases. At intermediate pH values, As(III) and Mn(II) also competed for the oxidants, but Mn(III) behaved as a reactive intermediate that reacted with Fe(II) or As(III). This result can explain the presence of As(V) in the solid phase. This detailed understanding of the As removal mechanisms in the presence of Mn can be used to tune the operating conditions of Fe EC for As removal under typical groundwater conditions.Biological proton channels are sub-1-nm protein pores with ultrahigh proton (H+) selectivity over other ions. Inspired by biological proton channels, developing artificial proton channels with biological-level selectivity is of fundamental significance for separation science. Herein we report synthetic proton channels fabrication based on sulfonated metal-organic frameworks (MOFs), UiO-66-X, X = SAG, NH-SAG, (NH-SAG)2 (SAG sulfonic acid groups), which have sub-1-nm windows and a high density of sulfonic acid groups mimicking natural proton channels. The ion conductance of UiO-66-X channels follows the sequence H+ ≫ K+ &gt; Na+&gt; Li+, and the sulfonated UiO-66 derivative channels show proton selectivity much higher than that of the pristine UiO-66 channels. Particularly, the UiO-66-(NH-SAG)2 channels exhibit ultrahigh proton selectivities, H+/Li+ up to ?100, H+/Na+ of ?80, and H+/K+ of ?70, which are ?3 times of&nbsp;that of UiO-66-NH-SAG channels, and ?15 times of&nbsp;that of UiO-66@SAG channels. The ultrahigh proton selectivity in the sulfonated sub-1-nm MOF channels is mainly attributed to the narrow window-cavity pore structure functionalized with nanoconfined high-density sulfonic acid groups that facilitate fast proton transport and simultaneously exclude other cations. Our work opens an avenue to develop functional MOF channels for selective ion conduction and efficient ion separation.The accuracy of structure-based (SB) virtual screening (VS) is heavily affected by the scoring function used to rank a library of screened compounds. Even in cases where the docked pose agrees with the experimental binding mode of the ligand, the limitations of current scoring functions may lead to sensible inaccuracies in the ability to discriminate between actives and inactives. In this context, the combination of SB and ligand-based (LB) molecular similarity may be a promising strategy to increase the hit rates in VS. This study explores different strategies that aim to exploit the synergy between LB and SB methods in order to mitigate the limitations of these techniques, and to enhance the performance of VS studies by means of a balanced combination between docking scores and three-dimensional (3D) similarity. Particularly, attention is focused to the use of measurements of molecular similarity with PharmScreen, which exploits the 3D distribution of atomic lipophilicity determined from quantum mechanical-based continuum solvation calculations performed with the MST model, in conjunction with three docking programs Glide, rDock, and GOLD.